DOLD多德
AD5992 DC24V 0032362故障安全继电器
DOLD正品AD5992 DC24V 0032362故障安全继电器，原装全新，品质有保证，上海锐誉优惠提供DOLD、PILZ安全继电器欢迎咨询；
连接A1，故障指示输入S1-S3或S1-S6，灯测试输入
LT和确认输入Q必须连接到相位连接。
即使没有连接集体指示灯，也在终端上27连接标称电压。
总线H和S承载低电压，可能不带任何电压
可以施加外部电压。是由共同铺设的电力线
害怕感应或电容干扰
建议对这些电缆使用屏蔽电缆。
经由闪光条BS的闪烁脉冲由内部触点提供
产生。应考虑此接触的最大负载
Hints
The connections A1, fault indication inputs S1 - S3 or S1 - S6, lamp test input
LT and acknowledgment input Q must be connected to the phase
be connected.
Even if no collective indicator light is connected, is on terminal
27 to connect the nominal voltage.
The bus lines H and S carry a low voltage and may not with any
External voltage can be applied. Are by co-laid power lines
to fear inductive or capacitive interference
It is recommended to use shielded cables for these cables.
The flashing pulse via the flashing bar BS is through an internal contact
generated. The maximum load of this contact is to be considered
(Technical specifications).
No lamp transformers may be connected to the fault message outputs
become. This would lead to unwanted fault messages during the lamp test
to lead.
AD5992同系列产品推荐：
DOLD多德 AD5992 AC50/60HZ 115V 0036169
DOLD多德 AD5992 AC50/60HZ 127V 0043659
DOLD多德 AD5992 AC50/60HZ 230V 0032361
DOLD多德 AD5992 AC50/60HZ 24V 0032360
DOLD多德 AD5992 AC50/60HZ 240V 0039674
DOLD多德 AD5992 AC50/60HZ 42V 0042090
DOLD多德 AD5992 DC110V + RV D.FOLG.POS. 0037745
DOLD多德 AD5992 DC125V + RV D.FOLG.POS. 0041089
DOLD多德 AD5992 DC230V + RV D.FOLG.POS. 0050379
DOLD多德 AD5992 DC24V 0032362
DOLD多德 AD5992 DC28-30V 0034904
DOLD多德 AD5992 DC48V + RV D.FOLG.POS. 0057320
DOLD多德 AD5992 DC60V + RV D.FOLG.POS. 0035511
