P+F倍加福
KFD2-STC4-Ex1产品详细信息:
KFD2-STC4-Ex1变送器供电模块1通道隔离屏障,24 V DC电源(电源导轨),输入2线和3线智能变送器和两线制智能电流源,输出0/4毫安到20 mA,端子,测试点,涨为符合SIL2。符合IEC61508,输入:2线制变送器|3线制变送器,额定电压:20...35 V DC,SIL/ IEC 61508.
参数表节选:的技术参数 KFD2-STC4-Ex1
产品阐述 | ||
Input 0/4 mA ... 20 mA Output 0/4 mA ... 20 mA | ||
一般特性 | ||
Signal type | Analog input | |
供电 | ||
连接器 | Power Rail or terminals 14+, 15- | |
额定电压 | 20 ... 35 V DC | |
纹波 | 在电源容限内 | |
功耗 | 1.4 W | |
功耗 | 1.8 W | |
输入 | ||
连接器 | terminals 1+, 2-, 3 or 5-, 6+ | |
输入信号 | 0/4 ... 20 mA | |
电压降 | ≤ 2.4 V at 20 mA (terminals 5, 6) | |
输入电阻 | ≤ 64 Ω terminals 2-, 3 ; ≤ 500 Ω terminals 1+, 3 (250 Ω load) | |
Available voltage | ≥ 16 V at 20 mA terminals 1+, 3 | |
输出 | ||
连接器 | terminals 7-, 8+, 9 | |
负载 | 0 ... 800 Ω | |
输出信号 | 0/4 ... 20 mA (overload > 25 mA) | |
纹波 | max. 50 µA rms | |
Transfer characteristics | ||
偏差 | at 20 °C (68 °F), 0/4 ... 20 mA ≤ 10 µA incl. calibration, linearity, hysteresis, loads and fluctuations of supply voltage | |
频率范围 | field side into the control side: bandwidth with 0.5 Vpp signal 0 ... 7.5 kHz (-3 dB) control side into the field side: bandwidth with 0.5 Vpp signal 0.3 ... 7.5 kHz (-3 dB) | |
Settling time | 200 µs | |
指令符合 | ||
电磁兼容性 | ||
Directive 2004/108/EC | EN 61326-1:2006 | |
Conformity | ||
电磁兼容性 | NE 21:2011 | |
防护等级 | IEC 60529:2001 | |
周围环境 | ||
环境温度 | -20 ... 60 °C (-4 ... 140 °F) | |
机械特性 | ||
防护等级 | IP20 | |
重量 | approx. 200 g | |
外形尺寸 | 20 x 124 x 115 mm (0.8 x 4.9 x 4.5 in) , housing type B2 | |
安装 | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
Data for application in connection with Ex-areas | ||
EC-类型 鉴定证书 | BAS 99 ATEX 7060 , for additional certificates see www.pepperl-fuchs.com | |
保护型号、类别、组别 | II (1)GD, [Ex ia] IIC, [Ex iaD], (-20 °C ≤ Tamb ≤ 60 °C) [circuit(s) in zone 0/1/2] | |
EC-类型 鉴定证书 | DMT 01 ATEX E 133 | |
保护型号、类别、组别 | I (M1) [Ex ia] I | |
符合标准 | TÜV 99 ATEX 1499 X , observe statement of conformity | |
Group, category, type of protection, temperature class | II 3G Ex nA II T4 [device in zone 2] | |
指令符合 | ||
94/9/EC 指令 | EN 60079-0:2012 , EN 60079-11:2007 , EN 60079-15:2010 , EN 61241-11:2006 , EN 50303:2000 |